FBEC & Coated TMT Bars NS Epoxy 4 min read

In the Maldives, a country where construction materials have to tolerate a characteristic, extreme coastal climate, NS Epoxy is one of the pioneers of FBEC (Fusion Bonded Epoxy Coated) TMT (Thermo-Mechanically Treated) manufacturers in Maldives.

The emphasis on quality, sustainability and innovation has secured us as the preferred supplier of durable and high performing reinforcement solutions for construction works where high performance is needed. Many NS Epoxy high-end products are available in a wide range of applications for the harsh environment of the Maldives coastal can be found, from high rise to marine structures.

Vision for Excellence: Durability in the Face of Adverse Conditions

The climate of the Maldives presents an alternative challenge for building materials. When in contact with saline air at high relative humidity, it can cause the deteriorated structure failure of the morphology of conventional reinforcement bars, such as corrosion and structural damage. Being in contact with such materials, conventional steel bars will be exposed to rust and wrong structural behavior in the long term.

This is the place where NS Epoxy's FBEC TMT bars count. Our product is covered with a fusion-bonded epoxy coating which on the surface has superior corrosion resistance under maritime conditions even in the wettest and saltiest conditions. This barrier facilitates a superior performance of the steel bars not only by providing corrosion protection of this layer but also retaining strength and service life along the service life of a structure.

Our FBEC TMT bars are designed for the most demanding coastal conditions and are the solution of preference for buildings, bridges, roads and other critical civil works in the Maldives. Because of the commitment to a technological and quality innovation NS Epoxy it is reached the top spot in the market for its range of reinforcement products, all is guaranteed by the reliability and durability.

NS Epoxy FBEC TMT Bar Manufacturing Process

The manufacturing sequence of NS Epoxy FBEC TMT bars is under the control of severe quality monitoring in order to ensure that each bar meets the international standards. Only high-grade raw materials are used for our products in order to offer the highest performance and stability.

The procedure leading to the preparation of the surfaces comprised the removal of all the impurities, rust and mill scale from the steel, which would result in a clean and smooth surface not covered with the epoxy binder. This extremely careful preparation stage allows a uniform coating of epoxy, which encapsulates the steel in a protective shell. By this protection not only moisture and chloride are excluded, but the bars are excluded from aggressive chemicals and environmental factors.

Using a combination of advanced and current production techniques, NS Epoxy delivers reinforcement bars that are stronger and have higher strain elasticity, more resistant to corrosion, and, as a consequence, usability in the long term for all kinds of construction job.

Advantages of NS Epoxy’s FBEC TMT Bars

  • Anti-Corrosion Protection: Excellent—unequalled—corrosion resistance of the fusion-bonded epoxy (FBE) coating on NS Epoxy's TMT bars is maintained, ensuring the structural integrity of buildings despite the humid, sea-saline operating conditions in the Maldives.
  • Enhanced Structural Strength: Our TMT bars are manufactured to withstand high tensile strength and elasticity to give us sound structure and reliability. It possesses good features for high structures, ocean structures (seacrafts) and all of the other applications, for which the highest amount of robustness is required.
  • Cost-Effective: NS Epoxy TMT bars ensure long-term, high rate of return of investment by minimising the unnecessary maintenance and repair it needs. It is at the expense that this corrosion resistance and durability are enhanced, which, in turn, have the result that construction projects may benefit from a longer serviceability life and do not need to be constantly maintained.

Why Choose NS Epoxy for FBEC TMT in Maldives?

Choosing NS Epoxy is not only a choice of top quality construction materials, but also the conviction that your project will be done on time and to the absolute best standards. Our commitment to efficient supply chain management ensures that contractors and developers in the Maldives receive the products they need, when they need them, without compromise.

NS Epoxy is a name that directly stands for quality and reliability in the construction field. For projects for which, reinforcement bars of strong corrosion-resistant steel are required, the final solution being the use of NS Epoxy's FBEC TMT bars gives, a solution that guarantees durability and service life.

Share this page